Create this project yourself with sheet material cut to size by TOSIZE.es!

J.J.

Average

2 minutes

Description

Modern cat tree or climbing post. A pole where our cats can climb, romp but also rest. High up in the tree they can have a nice view of everything and feel safe. The cat tree has a modern look based on an aluminum pole that is clamped between the floor and ceiling. The steps are round disks of MDF.

DIY: cat tree

The base of the pole is made from an old IKEA cupboard of the Stolmen type which we bought on marktplaats. The platforms are 22 mm MDF discs that are painted with silk matt lacquer. We had the discs made at OPMAATZAGEN.nl and they are very nicely circle shaped. Round holes have been drilled in the discs with a hole saw so that the discs fit over the post. They are clamped to the post with the standard shelf holders from IKEA Stolmen.
Ultimately we created two cat trees

The dimensions of the project

Height of the tree is 260 .0 cm. The smallest discs are 26.0 cm in diameter and the largest disc is 45.0 cm. The middle disk is 40.0 cm. The tree has a total of 6 discs with a mutual distance of 30.0 cm. The lower disk is mounted at a height of 45.0 cm from the floor.

Tip! Also check out our handy DIY tips!