Create this project yourself with sheet material cut to size by TOSIZE.es!

Roel

Easy

1 minute

Description

A vertical garden for outdoors, with flowers and herbs. Six containers to put the plants in. Including (semi) automatic irrigation system. The container at the bottom acts as a water tank with a pump in it for... There is no permanent water tap.

Make flowers and spice rack yourself with concrete plywood

Ordered Douglas planks from another supplier and saw them to size myself. The beams were properly measured and screwed at an angle of 45 degrees! (handy to do with two people)

The back wall is made of ; I had this flat material cut to size. The edges are finished with a rubber seal. Then the back wall was screwed to the uprights.

In the containers, root cloth and an irrigation system from Gardena (mircodrip system). The water tank is finished on the inside with pond liner and can be opened via a lid. The whole thing is screwed to the shed via the concrete plywood (4mm). Douglas is finished with HK Glaze for protection and against aging.